Télécharger Imprimer la page

Tokai LAR-5722B Manuel D'utilisation page 54

Publicité

6. PLAYBACK WITH SPEED
During normal playback, press and hold the >>|/|<< button on the remote control continuously to fast
forwards or backwards at the following speeds: x2, x4, x8, x16, 20,normal.
During speed playback, press the PLAY button to resume normal playback.
7. PLAYBACK WITH SLOW SPEED
During VIDEO playback , press the SLOW_FWD button to execute the Slow Forward function.
With each consecutive pressing of the SLOW_FWD button, the playback speed decreases. The speed levels in
Slow Forward as follows: x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.
During slow forward, press the PLAY button to resume normal playback. The function is only for video.
8. DISPLAY STILL FRAME STEP BY STEP
If the unit is currently playing video, press the STEP button consecutively to display still frame step by step.
Press the PLAY button to resume normal playback.
9. PLAYBACK REPEATEDLY
ONE/ALL Repeat
1.
In the mode of DVD playback:
Press the RPT button on the remote control to select REP CHAPTER, REP TITLE, REP ALL or OFF.
2.
In the mode of VCD (PBC OFF)/CD playback: press the RPT button to select REP 1, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT button is not available.
3.
In the mode of MP3/WMA playback: Press the RPT button to select REP 1, REP DIR, REP ALL or OFF.
A-B Repeat
Press the A-B button if you want to repeat a specific segment on a disc that you define:
1.
Press the A-B button at a point (A) where you want it to be the start point of the repeat segment. Press
the A-B button again at a point (B) where you want it to be the terminal point of the repeat segment. Then it
will play the segment repeatedly.
2.
To cancel the A-B repeat mode and resume normal playback, press the A-B button for the third time.
Note: During DVD/VCD/MP3/WMA/CD playback, points A and B must be within the same track.
10. PLAYBACK IN SCAN MODE
1. When playing VCD(PBC OFF)/CD discs , press the INT button to play the previous 10 seconds part of each
track on the disc. Press the INT button again to resume normal playback.
2. When playing DVD/MP3/WMA sources, the INT button is not available.
TOKAI
All manuals and user guides at all-guides.com
DISC USB AND SD CARD OPERATION
53

Publicité

loading