Acuity Speech Mode - Start Screen; Reading Order; Capturing Document - Rehan ACUITY SPEECH Manuel D'utilisation

8 Acuity Speech mode - Start screen

When the Acuity Speech is starting up it shows an hourglass on screen. This
means the device is starting up its text recognition capabilities. When this is
fi nished the hourglass disappears and you can switch to Acuity Speech
mode by tapping the on/off button or fl ipping over the remote.
OCR quality might vary due to ambient light, paper and print quality. Don't
fully rely on on processed text alone. Check critical documents (i.e. doctor
prescriptions) in Original view or Acuity Basic mode.
Controls
Scan area
The yellow marker indicates the scan area. Tap this area to go to Original
view. See Chapter 10 Original view for more information. Tap and hold to go to
Digital view. See Chapter 11 Digital view for more information.
Play button
Tap this button to go to Original view. See Chapter 10 Original view for more
information. Tap and hold to go to Digital view. See Chapter 11 Digital view for
more information.
Menu
Tap this button to open the menu. The menu allows you to set functionality as
user preferences, read aloud preferences, system settings and allows the user
to save and load documents. See Chapter 12 Menu for more information.

Reading order

When a page is captured the system processes the page and defi nes the
text and image zones. Text zones are by default scanned from upper left top
corner to lower left corner and back to top etc. This depends on the white
space, colors, text sizes and images. The processing also auto-detects
tables and read rows from left to right.

Capturing document

When the device is capturing a document you will see an hourglass in the top right and
you will hear a ticking sound. When the device is done, you will enter Original view or
Digital view. When audio feedback is off you will hear no ticking.
Acuity Speech
When the device is switched to
Acuity Speech mode it shows the
Start screen. In this screen there's
a full page live view of the tableau.
The yellow marker indicates the
scan area.
The device scans documents up
to A4 or US letter size. When the
document is placed at a slight
angle or if the text is 90° rotated,
the software will correct this.
EN
11