Publicité
5.
Operate the control panel (see image above) as follows:
- Push the Power on/off button, all buttons light up and
two digital screens light up (both displays show the word
'ON').
- The airfryer defaults to the working mode of Zone 1. If
you want to select Zone 2, push button 2 and select
your preferred program afterwards (button 11-20).
- Use the temperature + and - buttons to adjust the
temperature.
- Use the time + and - buttons to adjust the time. After
selecting your preferred settings, press the START/
PAUSE button to start the program.
- During the cooking process, you can pull out the basket
to check the food status or shake the food. 'STOP' will
show on the digital screen, indicating the pause state.
You can resume cooking by putting the basket back into
the air fryer.
- If you want to pause cooking, press the START/PAUSE
button. If you want to continue the cooking, push the
START/PAUSE button again. When the program is
paused, you can adjust the temperature and time of any
zone. When resuming cooking you need to push the
START/PAUSE button again. If you have both baskets
in use, you need to push the START/PAUSE button
twice, to restart both programs.
- After the program is completed, you will hear a 'Beep'
sound and the digital screen will display the word 'End'.
- Press the Power on/off button for 3 seconds to switch
off the air fryer.
6.
Pull the basket out of the appliance and place it on the
stable surface.
7.
Check if the ingredients are ready. If the ingredients are not
ready yet, simply slide the basket back into the appliance
and set the time to a few extra minutes.
8.
To remove ingredients (e.g. fries), pull the basket out of the
airfryer and place it on a heat resistant surface.
9.
Do not turn the basket upside down, as any excess oil that
has been collected on the bottom of the basket will leak onto
the ingredients.
10. Depending on the type of the ingredients in the airfryer,
steam may escape from the basket.
11.
Empty the basket into a bowl or onto a plate. Lift the
ingredients out of the basket with a pair of tongs.
12. When a batch of ingredients is ready, the airfryer is instantly
ready for preparing another batch.
TROUBLESHOOTING
Problem
The airfryer does not work.
The ingredients fried with the
airfryer are not cooked-through.
The ingredients are fried
unevenly in the airfryer.
Fried snacks are not crispy
when they come out of the
airfryer.
I cannot slide the basket into
the appliance properly.
White smoke comes out of the
appliance.
Fresh fries are fried unevenly in
the airfryer.
4
Possible cause
The appliance is not plugged in.
The amount of ingredients in the
basket is too big.
The set temperature is too low.
The preparation time is too short.
Certain types of ingredients need
to be shaken halfway through the
preparation time.
You used a type of snack which
is meant to be prepared in a
traditional deep fryer.
There are too many ingredients in
the basket.
You are preparing greasy
ingredients.
The basket still contains grease
residues from previous use.
The fresh potato fries are not
rinsed well before frying.
SMART FINISH FUNCTION
Select a different temperature and time per basket to cook
different ingredients but finish at the same time!
- Put the ingredients in the baskets and slide the baskets
back into the airfryer.
- Push the SMART FINISH button.
- Push button 1 and select a program (button 11-20). If
needed, adjust the temperature and time for basket 1.
Push button 2 to switch to basket 2. Select a program
(button 11-20) and if needed, adjust the temperature
and time for basket 2. Then push the START/PAUSE
button to start cooking in both zones. The two digital
screens display the time countdown for zones 1 and 2.
The program with the shortest cooking time will show
the word 'Hold' on the display and it will start as soon
as the remaining preparation time of the other basket is
the same.
- If you want to pause cooking, press the START/PAUSE
button. If you want to continue the cooking, push the
START/PAUSE button again. When the program is
paused, you can adjust the temperature and time of any
zone. When resuming cooking you need to push the
START/PAUSE button twice.
- After the cooking is completed, you will hear a 'Beep'
sound and the digital screen will display the word 'End'.
MATCH COOK FUNCTION
Set the same parameters for the left and right basket to cook a
large amount of food at the same time.
- Put the ingredients in the baskets and put the basket into
the airfryer.
- Push the MATCH COOK button and select a program
(button 11-20). The digital screen will display the same
information for zones 1 and 2.
- If needed, adjust the temperature and time and push
the START/PAUSE button to start cooking. Two digital
screens will display the countdown of time in Zone 1
and Zone 2.
- If you want to pause cooking, press START/PAUSE
button. If you want to continue the cooking, push the
START/PAUSE button again.
- After the cooking is completed, you will hear a 'Beep'
sound and the digital screen will display the word 'End'.
Put the power plug in an earthed power socket.
Put smaller batches of ingredients in the basket. Smaller
batches are fried more evenly.
Adjust the temperature.
Adjust the time.
Ingredients that lie on top of or across each other (e.g.
fries) need to be shaken approximately halfway through the
preparation time.
Use oven snacks or lightly brush some oil onto the snacks for a
crispier result.
Do not fill the basket beyond the MAX. indication.
When you fry greasy ingredients in the airfryer, a large amount
of oil will leak into the basket. The oil produces white smoke,
and the basket may heat up more than usual. This does not
affect the appliance or the end result.
White smoke is caused by grease heating up in the basket.
Make sure you clean the basket properly after each use.
Rinse the fresh potato fries properly to remove starch from the
outside of the sticks.
Solution
Publicité
