Publicité
Assembly - Hanging the Fan (continued)
3
Preparing for mounting
□
Turn a wood screw (RR) (not provided) into the ceiling.
□
Place the looped end of the safety cable (T) onto the wood
screw and then tighten the screw firmly, or connect the safety
cable directly to outer joist.
4
Making the electrical connections
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/downrod assembly. If using the ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the ball/downrod assembly (B)
provided, you can cut the lead wires to your desired length (no
shorter than 12 in.) This will make extra room in the canopy (C),
if you do not wish to cut the wires, you will need to neatly wrap
them.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
5
Wrapping the extra wire
NOTE: Follow this step ONLY if you did not cut the extra length from
the wires coming from the ceiling fan.
□
Gently wrap the excess wire around the mounting bracket (A).
□
Secure the wires with electrical tape.
RR
T
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring into
the outlet box.
Black
Blue & Black
10
A
Outlet box
in the ceiling (SS)
Green or bare wire
White
White
Green
BB
Publicité
