Publicité
GAFFS
• Good honing ensures correct spiking of the gaff into the trunk. Hone the two upper edges, following the
original angles, using a flat file or grinding machine with a fine grain wheel (higher than 80).
Be careful to not overheat when using grinding wheel (hone in short bursts).
GRIPS
• Hone each tooth, following the original angles, using a flat file.
[EN]
9
TRANSPORT / STORAGE
After use, the dedicated gaff covers must be placed over the gaffs.
If needed, dry out the shells and pads before storing. Do not place the climbing spurs in
contact with any heat source higher than 30° C or any material that can damage them
and/or reduce their technical performance.
G
1
Shocks and other poor treatment can weaken your equipment and cause serious, even
invisible, damage. During transport and use, take the necessary precautions.
Store in a dry place, free from exposure to weather; heat sources more than 30°C; and
corrosive materials capable of damaging it and/or reducing its technical performance.
[EN]
10
REPAIR
Do not use the climbing spurs if they have been modified in any way.
Only FTC TREE is authorized to carry out repairs on your product. Contact your retailer.
WARNING
REPAIRS OR MODIFICATIONS BY ANYONE OTHER THAN FTC TREE ARE PROHIBITED.
ONLY GENUINE MANUFACTURER PARTS GUARANTEE PROPER FUNCTIONING OF THE DEVICE.
P. 23
Publicité
