Publicité
[EN]
5
USE
INSTRUCTIONS TO FOLLOW BEFORE BEGINNING WORK
• Carry out a visual inspection of the tree. Ensure its sturdiness and the compatibility of the (tree)
supports chosen with the entire system to be set up.
• Make sure you have an emergency rescue plan.
• Set up a marked work area (danger zone).
• Ensure all persons in the work area wear PPE.
• Make certain all rules and instructions for the equipment in use are followed.
ALWAYS INSPECT BEFORE AND DURING USE
Users are responsible for regularly checking their equipment. Your safety and that of others present during
the phases of work depend on this verification.
Check:
• The overall condition of your equipment.
• For metal components: no cracks, distortion, use, or signs of corrosion.
• The proper tightening of all the screws (gaffs, foot straps, screws holding the shells on the shanks).
• For textile/plastic components: no cuts, burns, difference of density in the structure (soft/hard areas).
• Accurate tightening of the leg and foot straps.
• Suitable honing of the gaffs and grips.
WARNING
LEAVE THE GAFF COVERS IN PLACE WHEN NOT IN USE.
YOU MUST MAKE SURE ALL THE SCREWS ARE TIGHTENED. NEVER CLIMB IF A SCREW IS LOOSE
OR MISSING. MAKE SURE THE SCREWS ARE IN PLACE AND PROPERLY TIGHTENED ON A REGULAR
BASIS.
THIS SYSTEM IS RESERVED EXCLUSIVELY FOR TREE CARE WORK. FTC IS NOT LIABLE FOR ANY
USE—BE IT TECHNICAL OR MATERIAL—OTHER THAN DESCRIBED IN THESE INSTRUCTIONS.
IF YOU HAVE ANY DOUBTS, PLEASE CONTACT YOUR RETAILER.
P. 21
Publicité
