Dometic INC1015RD Manuel D'utilisation page 9

3. Press
to confirm the selection and return to the Home screen.
7.3.6 Entering the main menu
NOTE For complete menu diagrams, see
From the Home screen, press and release
7.3.7 Selecting a menu option
1. Enter the main menu. See Entering the main menu
2. Rotate
to scroll to the desired option.
3. Press
to confirm the selection.
The submenu for the option displays the current setting.
7.3.8 Selecting the fan speed
1. Select
from the main menu options. See
page 9.
2. Rotate
to the desired fan speed.
• 1 - Low
• 2 - High
• 3 - Turbo
• Auto
3. Press
to confirm the selection.
The display returns to the Home screen and shows the current fan speed in the
upper right corner.
7.3.9 Setting a schedule
1. Set the clock for the thermostat. See
2. Select
from the main menu options. See
page 9.
3. To enable, disable, or activate scheduling, select MODE.
4. Rotate
to ON, OFF, or AWAY.
5. Press
.
6. To set the awake, sleep, or away option, rotate the
7. Press
.
8. Rotate
to set the hours.
9. Press
.
10. Rotate
to set the minutes.
11. Press
.
12. Rotate
to set the target temperature.
13. Press
.
14. Press
to return to the main menu.
15. Press
to return to the Home screen.
7.3.10 Turning the lights on or off
NOTE Leaving the rooop unit's light on when the RV is in motion on a public
road is against the law in some jurisdictions and may result in a traffic ticket.
The operates the LED light on the rooop unit, if equipped. The operates the Air
Distribution Box (ADB) or Return Air Grille (RAG) light inside the RV, if equipped.
1. Select
or from the main menu options. See
page 9.
Mode navigation tree on page 5.
.
on page 9.
Selecting a menu option on
Selecting a setting on page 9.
Selecting a menu option on
to AWAKE, SLEEP, or AWAY.
Selecting a menu option
2. Press
to confirm the selection.
3. Rotate
to select ON or OFF.
• When the light is off, the icon is gray.
• When the light is on, the icon is blue.
4. Press
to confirm the selection and return to the Home screen.
7.3.11 Viewing a zone's temperature
1. Select
from the main menu options. See
page 9.
2. Press
.
3. Rotate
to view the indoor temperature in each zone.
4. Press
to return to the Home screen.
7.3.12 Selecting a mode
1. Select MODE from the main menu options. See
page 9.
2. Rotate
to the desired selection.
3. Press
.
8 System configuration
8.1 Initializing the system
NOTE Perform this task if legacy devices are present. Do not use if installing
all new electronic controls.
This task must be completed aer the instalation of of a legacy CCCII electronic control
and before operating the system. It will detect all the zones in the system.
1. Confirm that the thermostat is off.
2. Simultaneously press and hold
on the display.
3. Release the buttons, then press
8.2 Selecting a setting
1. Select
from the main menu options. See
page 9.
2. Rotate
to the desired option.
3. Press
to confirm the selection.
8.3 Changing the temperature unit of measurement
1. Select
from the settings options. See
2. Press
.
3. Rotate
to set the temperature unit to Celsius or Fahrenheit.
4. Press
.
5. Press
to return to the main menu.
6. Press
to return to the Home screen.
on
Selecting a menu option on
Selecting a menu option on
and buttons for three seconds. INIT shows
to exit the system initialization.
Selecting a menu option on
Selecting a setting on page 9.
EN
9