Publicité
EN
TEST SIGNAL
1.
Turn the measuring range switch to position
2.
A test signal in the form of a 50 Hz AC voltage, approx.
5 Vpp, impedance 50 kΩ, is applied between the outlets
marked VΩ mA and COM.
OVERLOAD PROTECTION
15 seconds at max 220 VAC rms. 1 is shown on the display if there
is an overload.
MAINTENANCE
REPLACING THE BATTERY AND FUSE
•
The fuse seldom needs replacing during normal and correct
use – if the fuse trips this is almost always a result off
misuse.
•
If the symbol
means the battery is discharged and must be replaced.
•
To replace the battery and fuse (500 mA 500 V fast for mA
connection, 5 A 500 V fast for 5 A connection), remove the
two screws underneath the product and replace the battery
or fuse. Insert the new battery with the correct polarity.
44
is shown on the product display this
.
Publicité
