Publicité
to unlock gate:
If the gate does not close properly:
1. Gate is not properly aligned in the door
frame.
Solution: To adjust the gate's alignment,
loosen all four tension bolts and reposition
gate so that it matches the "correct" image.
Re-tighten tension bolts.
2. Pressure of tension bolts needs to be
adjusted.
Solution: Loosen or tighten the upper tension
bolts. Ensure the upper latch engages securely
when the gate swings closed, and that it can
be released properly when the sliding lock tab
is pushed back.
• Regularly check tension bolts to make sure the gate is securely in place.
• Do not use the gate if any components are damaged or missing.
• Surface clean with a damp cloth or sponge using mild detergent and warm water.
MANUFACTURED FOR • FABRIQUÉ POUR
KIDS2, LLC ATLANTA, GA USA 30305 • 1-800-230-8190
IMPORTED BY • IMPORTÉ PAR
KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL HEMPSTEAD,
HP2 4TZ • +44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA • HECHO EN CHINA • FABRIQUÉ EN CHINE
operation:
hold open feature:
troubleshooting:
maintenance:
©2024 KIDS2, LLC www.kids2.com/help
Colors and styles may vary.
MADE IN CHINA.
17172, 17173_092624
Publicité
