Télécharger Imprimer la page

cecotec FACECARE SKINROUTINE Manuel D'instructions page 51

Publicité

level 1" - "Lift mode level 2" - "Lift mode level 3".
3. The Massage mode allows you to control the intensity of the sonic vibration, while the Lift
mode controls the intensity of the EMS microcurrents. You can adjust the intensity level
from lower to higher.
4. Mode change: when the appliance is switched on, the Massage mode is activated by
default. Press the power and mode change button twice in succession to switch directly
from one mode to another.
Automatic shut-off function
If no operation is performed, the appliance will automatically shut down after 6 minutes of
inactivity.
Modes
-
Massage mode: combines the application of constant heat at 42 °C with sonic vibrations,
ideal for improving circulation, decongesting bags and reducing dark circles and eye
fatigue.
This mode can be used by applying eye contour beforehand or without applying any facial
product. If you choose to use a product, make sure it is suitable for your skin type.
-
Lift mode: it combines the application of constant heat at 42 °C with EMS microcurrents to
help tighten, firm and smooth the appearance of wrinkles and fine lines around the eyes.
To increase effectiveness and help conduct the current, apply a small amount of your
cream, serum or eye cream. This mode is not recommended for dry skin.
Warning: avoid using the appliance directly on the eyelids. Do not use if your eyes are inflamed
or swollen.
Firming massage for the eye contour
-
Press and hold the power and mode change button to switch the appliance on and activate
the Massage mode. Select the intensity level according to your skin's needs. Gently press
the massage head onto the bottom part of the eye and glide it around the eye contour,
from the tear trough to the temple area. It is recommended to use the Massage mode for
1-2 minutes on each contour.
Smoothing wrinkles and fine lines around the eyes
-
Before using the Lift mode, use the Massage mode to help stimulate the skin around the
eyes and enhance the absorption of the facial products applied.
-
Switch to Lift mode and select the intensity level according to your skin's needs. Gently
press the massage head onto the bottom part of the eye and glide it around the eye
contour, from the tear trough to the temple area. Then, glide the massage head several
times along the expression lines of the eye in an upward motion. It is recommended to use
the Lift mode for 1-2 minutes on each eye.
-
Use this mode on a daily basis for best results.
-
After using the appliance, turn it off and follow the steps of your daily facial routine.
ENGLISH
FACECARE SKINROUTINE
51

Publicité

loading