Publicité
English
................................................................................................................................................................................................................
C. Hardware Function
Hardware
Function
Power Jack
Power Button
(On)
Power Button
(Off)
Power Button
(Enable Log
mode)
Power Button
(Disable Log
mode)
Power Button
(Push to Log)
D. LED Indicator
LED Status
Power
(Red/Green)
Bluetooth
(Blue)
.........................................................................................................................................................................................
2
Take the power cable and connect it to the power
jack (mini USB type) for charging only
Press power button and hold for 4 sec to power
BT-Q1300ST on.
Press power button and hold for 3 sec to power
BT-Q1300ST off
Log is on when BT-Q1300ST is powered on by
pressing power button and hold for 4 sec. The
LOG status LED (green) would blink, and start to
log.
After power on BT-Q1300ST, press power button
and hold for 2 sec to disable log mode. Then
BT-Q1300ST would stop logging with the LOG
status LED (green) Off. Press power button and
hold for 2 sec to enable log again.
Press power button once to push to log the
favorite Point of Interest
(With Bluetooth function)
Flash
Low Power (Red)
Fully charged(Green)
Flash per 2 sec.:
Bluetooth connected
and transmitting Mode
Flash per 5 sec.: Power
saving mode
Description
ON
Recharging
(Green)
Not
connected
/Pairing
www.Qstarz.com
OFF
GPS not
powered
GPS not
powered /
Log Mode is
on
Publicité
