Metabo HPT M 3612DA Instructions De Sécurité Et Mode D'emploi page 10

English
SPECIFICATIONS
1. Cordless router
Model
Motor
Collet chuck capacity
Main body stroke
No-load speed
Type*
Battery*
Voltage
Weight
* Existing batteries (BSL3660/3626/3620, BSL18xx and BSL14xx series, etc.) cannot be used with this tool.
If using the AC/DC adapter, please read and understand its manual before operating the power tool.
NOTE
Available bit: Straight bits, Flush trimming bits, Chamfering bits, Round-over bits, Rabbeting bits, Dovetail bits.
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
3. AC/DC Adapter
Model
Input power source
Output voltage
Operating temperature range
Weight
10
M3612DA
DC brushless motor
1/2" (12.7 mm), 1/4" (6.35 mm)
1-31/32" (50 mm)
11,000–25,000 /min
Li-ion battery Model BSL36A18 /
AC/DC adapter Model ET36A (sold separately)
DC 36 V / 18V
8.4 lbs (3.8 kg)
(BSL36A18 and dust collector attached)
UC18YSL3
Single phase: AC 120 V 60 Hz
BSL36A18 : Approx. 32 min
DC 14.4–18 V
DC 8.0 A
1.3 lbs. (0.6 kg)
ET36A
Single phase: AC 120 V 60 Hz
14°F (-10°C)–104°F (40°C)
Adapter : 1.8 lbs. (0.8 kg)
Box : 2.6 lbs. (1.2 kg)
36 V