POLTI SV240 Manuel D'instructions page 17

Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Ensure that the points in Sections 1 and 2 have
been followed.
3.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one of
the three steam-adjustment positions; for this
type of surface, we recommend the Maximum
level of steam.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If
adjustment dial has been turned from the
"OFF" position, by inserting the handle
tube in the coupling hole, the appliance
will start to emit steam. Always face the
appliance downwards, not directing it
towards people, animals or objects.
3.2 About 30 seconds after it has been
turned on, the appliance will start to dispense
steam.
3.3 Clean the floors by moving the brush.
WARNING: Do not use the appliance
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the
power supply from the electric socket and
wait a few minutes to allow the cloth to
cool.
4. CLEANING DELICATE FLOORS
WARNING: Before steam treating surfaces
(wood or laminate floors, carpets, rugs,
leather and fabrics and any surfaces
especially those
treated), consult the surface manufacturer's
or the supplier/installer's instructions and
always perform a test on a section that
is out of view or on a sample. Allow the
steamed surface to dry to ensure that there
is no deterioration, change of colour or
deformation and that the surface stands up
to the temperature of the steam.
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Ensure that the points in Sections 1 and 2 have
been followed.
the ignition/steam-
that are delicate
4.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one
of the three steam-adjustment positions; for
this type of surface, use the Medium level of
steam.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
WARNING: If the ignition/steam-adjustment
dial has been turned from the "OFF"
position, by inserting the handle tube in
the coupling hole, the appliance will start
to emit steam. Always face the appliance
downwards, not directing it towards people,
animals or objects.
4.2 About 30 seconds after it has been
turned on, the appliance will start to dispense
steam.
4.3 Clean the floors by moving the brush.
WARNING: Do not use the appliance
without the cloth.
WARNING: To remove the cloth from the
brush, turn the ignition/steam-adjustment
dial to the "OFF" position, unplug the
power supply from the electric socket and
wait a few minutes to allow the cloth to
cool.
5. CLEANING WOODEN FLOORS
WARNING: Before steam treating surfaces
(wood or laminate floors, carpets, rugs,
leather and fabrics and any surfaces
especially those
treated), consult the surface manufacturer's
or the supplier/installer's instructions and
always perform a test on a section that
is out of view or on a sample. Allow the
steamed surface to dry to ensure that there
is no deterioration, change of colour or
or
deformation and that the surface stands up
to the temperature of the steam.
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Ensure that the points in Sections 1 and 2 have
been followed.
5.1 Turn the ignition/steam-adjustment dial
clockwise, from the "OFF" position to one
of the three steam-adjustment positions; for
this type of surface, use the Minimum level of
steam.
The "steam ready" indicator light will come on
to indicate that the appliance is on (heating).
| 17 |
that are delicate or