Publicité
EN
PLAY FROM USB
- Select the PLAYER source on the CH 3.
- Insert the USB. Select the USB mode on the player by pressing the MODE button and start playback by
pressing
if it has not started automatically or the USB was already connected to the mixer.
- Adjust the volume of the player itself with the buttons /VOL- and /VOL+ buttons and with the CH 3
slider. Long press the MODE button to toggle the play mode between ALL or ONE.
PC/Mac CONNECTION (SEND/RECEIVE AUDIO)
- Plug&Play. Compatible with Windows and Mac.
- Connect a USB cable from this port to a PC/Mac, the PC/Mac will detect the mixer as an input and output
device. That is, you can send audio to the PLAYER channel and receive MAIN MIX audio on the PC/Mac
as long as you have PC mode selected on the player.
- SEND AUDIO FROM PC/Mac TO MIXER: You must have the CH 3 channel selector set to PLAYER and
PC mode selected on the player. The PC/Mac/Mac should have the mixer selected as the speaker output.
- RECEIVING PC/Mac/Mac AUDIO FROM THE MIXER: You must have PC mode selected on the player and
the PC/Mac/Mac must have the mixer selected as the audio input.
AUDIO RECORDING TO USB MEMORY
- Connect the USB stick to the mixer.
- To start recording, long press the button
recording timer will start. You can pause or resume playback with a short press of the button
- To stop recording, long press the button again
PC
and the display will show REC for a few seconds and then the
and the player will start to play the recordings.
- 4 -
.
Publicité
