Publicité
EN
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the GigBAR MOVE+ILS: Modes 1 and 3
synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4 synchronize with side 2 of the GigBAR
MOVE+ILS. When linked, effects will sync with the most similar effect on the selected side of the GigBAR MOVE+ILS:
Kinta effects will sync with one of the kintas, moving heads will sync with one of the moving heads, and wash effects will
sync with one of the pars. Laser effects will sync with the laser, and strobe effects will sync with the strobe effects
regardless of ILS mode.
This product will synchronize with the par effect on the selected side of the GigBAR MOVE+ILS.
To set the COREpar UV120 ILS to respond to an ILS signal:
1. Press <MENU> repeatedly until iLS_ shows on the display.
2. Use <UP> or <DOWN> to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2).
3. Press <ENTER>
DMX Values
1-Ch 5-Ch Function
1
1
UV
Strobe
(When CH3 is 000-031)
Program Speed
–
2
(When CH3 is 032-223)
Sound Sensitivity
(When CH3 is 224-255)
–
3
Programs
–
4
Dimmer
–
5
Dimmer Speed
5
QUICK REFERENCE GUIDE
Value
Percent/Setting
000 255 0–100%
000 015 No function
016 255 Slow to fast
000 255 Slow to fast
000 010 No function
011 255 low to high sensitivity
000 031 No function
032 095 Pulse effect 0-100%
096 159 Pulse effect 100%-0
160 223 100%-0-100%
224 240 Sound sensitivity 1
241 255 Sound sensitivity 2
000 255 0–100%
000 051 Dimmer speed set from menu options
052 101 Dimmer speed mode off
102 152 Dimmer speed fast
153 203 Dimmer speed medium
204 255 Dimmer speed slow
COREpar UV120 ILS QRG Rev. 3
Publicité
