Publicité
NOTE:
THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT.
DISPENSING WATER
To dispense hot water:
♦ Slide red safety button to the right and hold while pressing downward on hot water faucet to
dispense hot water.
♦ Safety button will return to its original position when faucet is released.
♦ Ensure all water has dispensed prior to removing glass from the dispensing area.
To dispense cold water:
♦ Press and hold downward on the cold water faucet to dispense cold water.
♦ When you have dispensed the desired amount of water, simply release the cold water faucet.
♦ Ensure all water has dispensed prior to removing glass from the dispensing area.
•
Wash the inside of the reservoir with a warm water and baking soda solution. The solution should
be about 2 tablespoons of baking soda to a quart of water.
•
The drip tray and water faucets should be cleaned with mild detergent and warm water.
•
At regular intervals or once a month inspect the coils located across the back of the dispenser.
Vacuum accumulation of dust or clean it with a soft bristled brush.
•
If the water dispenser will not be used for a long period of time, unplug the power cord from the
wall outlet.
•
Drain the water through the faucets.
•
Turn the switch market hot to the "OFF" position.
•
Drain the water from the tank by removing the plug from the back of the dispenser.
WARNING—THE WATER COMING OUT OF THE BACK SIDE MARKED "HOT" MAY BE SCOLDING.
Unit should not be transported on the sides. Place it upright if possible and cover it with a
l
blanket.
CARE AND MAINTENANCE
TAKING DISPENSER OUT OF SERVICE
12
Publicité
