Publicité
Making a recording
1
2
i
i
Note
• You cannot record a source connected through a digital
terminal.
• When recording CO, DVD, or TV, ensure the source is connected
through the corresponding analog terminals (* pages 10-12}
and "ANALOG" input is selected
page 22).
• When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
a
Recording on a tape deck or VCR
You can record to a tape deck connected to TAPE REC (OUT) or
to a VCR connected to VCR 1 OUT.
See the recording unit's operating instructions for details on how
to prepare it for recording.
When recording with a tape deck, you can record any source
except TAPE.
When recording with a VCR, you can record any source except
TAPE or VCR 1.
Note
Recording from the tape deck to the VCR is not possible.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
2
If you selected "VCR 2" in step 1, set
[m.
VCR 2, j-. VCR 3] to the required
position.
3
Begin recording.
Follow your recording unit's operating instructions.
4
Begin the source to be recorded.
Follow your equipment's operating instructions.
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press [TAPE MONITOR} once again to turn it off.
For your reference
Use the VCR 3 terminals on the front of the unit when dubbing
from a video camera.
!
JT5512
Publicité
