1 of 2
—
INSTRUC T ION SHEET
Boxes for dry, damp or wet locations CIFSC and
CIFSCC series
WARNING:
Risk of shock, disconnect
power before installation.
WARNINGS:
1. These boxes can be used in dry, damp or wet locations.
2. CAUTION! For installation in wet locations, a cover with gasket approved and
marked 'wet locations' is required.
3. If a closure plug is used, use weatherproof sealant to assure water tightness.
Made in Canada
—
tnb.abb.com
(US/Latin America)
tnb.ca.abb.com
(Canada)
abb.com
Warranty:
tnb.abb.com/ecpwarranty
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With
regard to purchase orders, the agreed
particulars shall prevail. ABB does not
accept any responsibility whatsoever for
potential errors or possible lack of
information in this document.
IMPORTANT
Read and understand all instructions and
safety information before use. Be aware of
proper usage and potential hazards.
CAUTION: Product should be installed
by a qualified electrician in accordance
with national and local electrical codes.
We reserve all rights in this document and
in the subject matter and illustrations
contained therein. Any reproduction
– in whole or in part – is forbidden without
prior written consent of ABB.
© 2022 ABB. All rights reserved.