Tria 4X Guide De Démarrage Rapide page 2

GET TO KNOW YOUR TRIA LASER 4X
Tria Laser 4X Bottom of Laser
TREATMENT WINDOW
Delivers laser light
SKIN SENSOR
during treatments
Unlocks the
Tria Laser 4X
DISPLAY
Guides you
through treatments
CHARGER SOCKET BATTERY CHARGER
Insert battery Charges the Tria Laser
charger here 4X. Unplug before use.
Display
LOCK BATTERY INDICATOR
Signals locked position Blinks when the
when not in use, unlocks battery is low and
with the skin sensor needs to be recharged
TREATMENT LEVEL PULSE COUNTER
Displays energy settings Counts the number of
pulses in a treatment
session
SKIN SENSOR
INDICATOR
POWER BUTTON
Indicates that skin
Adjusts levels and turns
sensor is ready for use
the Tria Laser 4X on/off
BEFORE FIRST TREATMENT
For detailed directions and important safety warnings, please read the
complete Instructions for Use guide before use.
HOW TO TREAT
Before every treatment, shave, clean and dry the area you wish to treat.
Before your first full treatment on any new area, perform a patch test in that area.
Repeat treatments every 2 weeks for up to 3 months or until you're satisfied with results.
1
TURN ON DEVICE
Unplug the Tria Laser 4X from the
battery charger and press the
power button.
2
UNLOCK
Unlock the device by holding the Skin
Sensor against the skin in the area you 1 2 3 4 5
wish to treat. If the Tria Laser 4X is safe
for your skin tone, a tone will sound and
the Tria Laser 4X will unlock (if device
doesn't unlock, see Instructions for Use
for more information).
CHARGE:
Charge the Tria Laser 4X until the battery light is full (~2 hours).
Unplug before use.
ACTIVATE:
A one-time, 5-minute activation is required before your first treatment.
In the US: visit triabeauty.com/activate or call Customer Care at 877-321-8742.
In Canada: visit triabeauty.ca/activate or call Customer Services at 877-321-8742.
3 SET THE TREATMENT LEVEL
Press the power button to adjust levels.
For best results, use the highest setting
that you can tolerate.
4
TREAT. HOLD FOR 2 BEEPS
• Touch and hold the treatment window
to the skin until you hear two beeps.
• After the two beeps have sounded,
lift the laser and place it back on the
skin so that it overlaps the previous
spot (about 1/4 inch or 5 mm).
5 KEEP GOING TO COVER THE AREA
Use the Tria Laser 4X Pulse Counter as a
guide to how many pulses you may need
to cover each area per treatment.
PULSE COUNTER GUIDE
UPPER LIP
Pulses: 25
Minutes: 2-3
UNDERARMS
Pulses: 100 per side
Minutes: 4-5 per side
BIKINI
Pulses: 200 per side
Minutes: 8-10 per side
UPPER LEG
Pulses: 600 per side
Minutes: 25-30 per side
LOWER LEG
Pulses: 600 per side
Minutes: 25-30 per side
Pulse counts and times are only approximations–your actual treatment area and number of pulses may vary.
Always follow the treatment instructions and warnings provided in the Instructions for Use booklet.
When treating larger areas like legs and back, you may need more than 600 pulses to cover the area.