Publicité
▪
This appliance is designed for food and beverage storage.
▪
Do not expose the appliance to direct sunlight.
▪ Keep the appliance away from candles, luminaires and open flames, in order to avoid fire
risk.
▪
The appliance is heavy. Be careful when moving it.
▪ If your appliance is equipped with castors, remember that these are only designed to
facilitate minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪ In order to avoid falling objects and to prevent damage to the appliance, do not overload
the compartments of the appliance.
To avoid contamination of food, please respect the following instructions:
▪ clean regularly surfaces that come in contact with food and accessible drainage
systems.
▪ store raw meat and fish in suitable containers so that it is not in contact with or drip
onto other food.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪ When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
▪ To ensure proper electrical connection, follow the recommendations given in the present
manual.
▪ Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
▪ It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪ Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the appliance is installed
This refrigerating appliance is not intended to be used as a built-in appliance
POWER SAVING
To limit the electricity consumption of your appliance:
▪
Install it in an appropriate place (see "Installing your appliance").
22
Publicité
