Publicité
NOTE
• It may become necessary to cancel or interrupt a
Self Clean cycle due to excessive smoke or fire in
the oven. To cancel the Self Clean function, press
CLEAR/OFF.
Removing/Assembling Lift-Off
Oven Doors
Door Care Instructions
Most oven doors contain glass that can break.
CAUTION
• Do not close the oven door until all the oven
racks are fully in place.
• Do not hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased
risk of breakage at a later time.
Removing Doors
1
Fully open the door.
2
Lift up the hinge lock
d
hinge arm
completely. Repeat on other
side.
Locked Position
a
Slot
b
Hinge Lock
c
Oven Frame
d
Hinge Arm
3
Firmly grasp both sides of the door at the top.
b
and flip it towards the
Unlocked Position
4
Partially close the door to approximately 5
a
degrees
. If the position is correct, the hinge
arms will move freely.
a
about 5°
5
Lift and pull the door towards you until the
hinge latches are completely loosened.
Assembling Doors
1
Firmly grasp both sides of the door at the top.
2
Fully insert the hinge arms
until the indentations
rest on the bottom edges of the slots.
a
Hinge Arm
b
Bottom Edge of Slot
c
Indentation
3
Slowly open the door fully. Make sure that the
hinge arms are properly engaged in the slots.
MAINTENANCE
53
a
b
into the slots
c
on the hinge arms
Publicité
