IFM CR3130 Manuel D'utilisation page 31

0x5020 1 CAN Receive
Object ID
(EEPROM)
0x5021 1 CAN Receive
Object ID (RAM)
Notice de montage CANwireless CR3130/CR3131
UInt32 rw 80000000
UInt32 rw 80000000
CAN receive object ID
(EEPROM)�
This value is used to set the RAM
receive ID automatically after a
device reset�
Combined with the value of the
corresponding mask register
it is possible to specify which
CAN message identifiers will be
received during „Realtime mode"
is active�
The bits of this variable have the
following function:
Bit 31 = 0: Receive object will be
receiving data (is active)
Bit 31 = 1: Receive object is
deactivated
Bit 30: not used, set to 0
Bit 29 = 0: 11-bit CAN-ID type
Bit 29 = 1: 29-bit CAN-ID type
Bits 0 to 28: CAN identifier
CAN receive object ID (RAM)�
Combined with the value of the
corresponding mask register
it is possible to specify which
CAN message identifiers
will be received while „CAN
Communication" is active�
This value may be changed
dynamically during operation�
The bits of this variable have the
following function:
Bit 31 = 0: Receive object will be
receiving data (is active)
Bit 31 = 1: Receive object is
deactivated
Bit 30: not used, set to 0
Bit 29 = 0: 11-bit CAN-ID type
Bit 29 = 1: 29-bit CAN-ID type
Bits 0 to 28: CAN identifier
FR
31