Publicité
FG95
1 Working light
5 Basket
8 Handle
COOKING
Carefully wash all accessories and the inner housing first. Allow to ventilate the
internal compartment keeping the container (6) away for about 30 minutes. Before
starting with the first cooking, turn on the appliance for 10 minutes at the maximum
temperature.
-
Connect to a suitable and earthed power socket.
-
Extract container (6) with care (Fig.4).
-
Insert food in the basket (5). Re-place the container (4) (Fig. 3).
-
If appliance went in standby, press knob (3) for 1 second.
-
Set program, temperature and time of cooking, as explained in following
paragraphs. Press
Caution: Never use container (6) without basket (5). Do not touch container or
inner parts of appliance during cooking and until complete cooling. Touch only
the handle (8).
-
Some foods should be mixed and shaked at half cooking. Take the handle (8) and
extract container (6). Shake it, then replace in its position.
Caution: don't press button (7) on the handle during this operation. (Fig.3)
-
When you ear the timer sound (5 beeps), cooking time is finished. Extract
container and check if food is ready. If not ready, replace container in its position
and set additional cooking of some more minutes.
Note: appliance can be switched off manually, pressing knob (3) for 1 second.
-
To remove food, take out container and put on a surface that can sustain hot
temperature (200°C); press button (7) and lift the basket (5).
Be careful to the hot steam when you remove container after cooking.
Don't turn the basket upside down (5) if it is linked to the container (6), because
oil and cooking residues on the bottom of container could drip on the foods.
-
Empty the basket in a container or in a dish.
-
Once cooking finished, if you want to start another one, air fryer is immediately ready.
CONTROL PANEL
A. Icons for 8 preset programs
B. Icon motor working status
C. Icon heating element working status
D. Button START/PAUSE
E. Knob
F. Temperature
G. Time
H. Button MENU'
FUNCTIONING
MANUAL FUNCTION
-
If appliance went in standby, press knob (E) for 1 second.
-
Press knob (E) once, temperature (F) flashes. Set
temperature rotating the knob (E).
-
Press knob (E) a second time, minutes (G) flash. Set time rotating the knob (E).
-
Press
to start cooking. Icons (B e C) show the state of fan and heating element.
2 Control panel
6 Container
9 Air outlet
to start cooking.
3 Knob
7 Basket release button
10 Power cord
4 Housing
13
Publicité
