Publicité
Before cleaning the appliance, always unplug the appliance.
Clean the interior of the appliance. Use warm water and a neutral detergent to prevent any bad smells occurring. After cleaning,
rinse the interior with clean water and rub dry. Leave the appliance to dry for 1 to 2 hours. Simply remove the shelves, drawer
and door compartments to clean them by hand. Do not clean the interior accessories in the dishwasher.
Clean the outside of the appliance and the gasket with a soft moist cloth.
For areas that are difficult to clean in the appliance, such as narrow gaps or corners, it is recommended to wipe them regularly
with a soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure no
contamination can accumulate in these areas.
We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order to
maintain a good output and low energy consumption.
Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as
alcohol, acetone, oils, etc.), boiling water, acid or alkaline items to clean the refrigerator considering that this may damage the
fridge surface and interior. Boiling water and benzene may deform or damage plastic parts.
Problem
Appliance is not functioning;
indicator light does not work
Temperature inside the
freezer is too high or too low
Appliance is excessively noisy
The lid does not close
properly
The compressor runs too long
Error code E2 is shown on the
display
Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
CLEANING & MAINTENANCE
TROUBLESHOOTING
Cause
Appliance is not plugged in
Thermostat has been set
incorrectly
Air circulation vents are blocked
Has the appliance been installed
correctly?
Are the pipes at the back touching
or vibrating?
Is the freezer loaded too full?
It is normal that the freezer operates
for a longer time in the summer.
There is a thick frost layer inside the
freezer.
Temperature sensor error
EN - 21
Solution
Plug the appliance in the socket
Set the thermostat correctly
Clean the ventilation openings
Check the installation
Check it and move the appliance forwards
Check the content of the freezer.
Do not place too much food at once in the freezer;
Do not place warm food in the freezer, wait for it to
cool down;
Do not open the lid too often.
Defrost and clean the freezer.
Contact a repair technician.
Publicité
