Publicité
APPLIANCE OPERATION
Installation, start-up and operation of the appliance
The appliance must be unpacked, and all parts of the packaging completely removed. It is recommended to keep the packaging,
as it can be helpful for further transport and storage of the appliance.
Prepare the appliance according to the instructions specifi ed in the "Appliance maintenance" section.
Insert the power cord plug into the socket. The ready indicator light lights up and the cooking plates start to heat up. The end of
the heating process will be indicated by the ready indicator light going out.
Carefully open the lid, spread the waffl e dough on the bottom cooking plate. Try to spread the dough over the entire surface of the
plate. Then close the lid. The ready indicator light will light up again. Wait until it goes out, then carefully lift the lid and remove the
baked waffl es from the cooking plate. If necessary, redistribute the dough and repeat all the steps to bake another portion of waffl es.
The appliance can be switched off at any time by removing the power cord plug from the socket. Do not leave the appliance un-
attended during operation. After the indicator light goes out, the appliance will not switch off automatically and will start to heat up
again after a while. Leaving the appliance unattended with waffl es between the cooking plates can lead to fi re.
WARNING! Special care should be taken when opening the heated lid. Use gloves to protect against high temperatures, grasp
the lid only by the handle.
The cooking plate heats up to a high temperature, contact with unprotected body parts can lead to serious burns. When preparing
food, care should be taken not to touch the cooking plate, and the food should be checked using appropriate utensils, e.g. tongs
or paddles made of plastic or wood.
When selecting utensils, it is important to take into account whether they can withstand the temperature generated by the cooking
plate. Do not use metal utensils or utensils with sharp edges. Such utensils can damage the cooking plate surface.
Appliance maintenance
ATTENTION! All maintenance activities must be performed with the appliance disconnected from the mains. To do this, remove
the power cord plug from the socket.
The appliance is used to prepare food placed directly on the cooking plate, therefore care must be taken to maintain proper hy-
giene so that the preparation of food is safe.
The cooking plate can be protected with a preservative agent for transport and storage. Before fi rst use, after cleaning, heat the
cooking plate to its maximum temperature and allow all residues of the preservative agent to evaporate. The evaporating pre-
servative agent can cause smoke, which is a normal phenomenon. Therefore, evaporation should be carried out in a place with
effi cient ventilation. Do not inhale the vapours of the preservative agent.
After the evaporation is fi nished and the smoke stops fl owing, disconnect the appliance from the power supply, wait until the
cooking plate cools down completely and clean it again with a cleaning agent. Only then can the cooking plate be used for food
preparation.
Clean the cooking plate and other parts of the appliance with a cloth soaked in a water solution of a mild dishwashing liquid. Re-
move any residues of the solution with a cloth soaked in water. After cleaning, wipe the appliance dry. The cooking plate should
be cleaned after each use, once it cooled down completely. Remove any food residue remaining on the cooking plate to prevent
it from burning when the appliance is used again, and to prevent its performance from being impaired.
Do not use solvents, corrosive agents, alcohol, petrol or abrasives for cleaning.
Clean the ventilation openings with a vacuum cleaner.
Caution! Never immerse the appliance in water or any other liquid.
Storage
If the appliance will not be used for an extended period of time, disconnect it from the power supply.
During storage, keep the appliance indoors, and make sure it is not exposed to dust, dirt, or moisture. It is recommended to store
the appliance in its original packaging.
Store the appliance in its working position. Do not stack products in layers. Do not place other items on the product during storage.
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Insulation class
Cooking plate dimensions
Net weight
O R I G I N A L
EN
Unit
[V~]
[Hz]
[W]
[cm]
[kg]
I N S T R U C T I O N S
Value
68014
220 – 240
50/60
700
I
21 × 18
0.9
11
Publicité
