Publicité
Troubleshooting:
The symptoms described below do not necessarily mean a failure within the display. Please check the following items before you initiate
request for repair.
Symptoms
No picture, no sound
No picture
Dark picture
No color
No reversing function (i.e.Picture)
Barriers Phenomena
Image Shaking
No Image
Image Blurring
Image Slanting
Declaration of conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
920-5205-00 Rev. B
Improper connection of automobile adapter. Use of un-authorized power supply. Power switch
is on OFF position.
Check whether AV cable is properly connected
Check whether brightness and contrast are adjusted correctly; Check whether the
environments temperature is too low.
Adjust the color settings.
The black wire of the monitor AV cable to the reversing light may be loose. The red wire from
the monitor may be loose.
Reason
Fix-up Bracket Release
Poor connection or system connect cables are broken
Camera lens are dirty
Cameras not installed in the right way
Possible Causes/Solutions
Ways to Solve
Adjust and Stabilize
CHeck the connection of the
monitor to the camera
Clean the camera lens
Adjust the bracket of cameras
Page 5 of 6
Publicité
