Important notices
Level Surface Notice:
Surface must be leveled before installation. We recommend building a level work space with a concrete or patio style surface. If the
surface is not properly leveled, the outdoor shed will not assemble correctly. Proper surface leveling will save you time in the long run, so
please do not ignore this step.
Building Code Notice:
Consult all local building codes, as well as city and county or dinances, to ensure that the construction of the outdoor shed does not
require a building permit. Proper building permit documentation may be required in your neighborhood, and it would be unfortunate to
learn this after constructing the shed.
Screwdriver Notice:
You may use a #2 Phillips head screwdriver bit and apower screwdriver ordrill, instead of a hand screwdriver. However, be aware that
the plastic pieces of your shed can be damaged by overtightening of screws. To avoid damage we strongly recommend the use of a low-
powered power screwdriver or a drill that has an adjustable clutch that is set on a low torque setting. If neither is available, use a hand
screwdriver. In any case use caution to avoid overtightening the screws.
Floor Puncture Notice:
Sharp objects may damage your floor. If resting sharp, heavy objects on your shed , place a block of wood between the sharp object and
floor.
CAUTION:
If more than six (6) inches of snow accumulate on the roof of the shed, carefully remove the snow to avoid possible roof collapse.
While standing on the ground, remove the snow from the roof with a broom or snow shovel. Do not stand on the roof to remove
snow.
Installation precautions
Side girder
There are three types of stringer, they are distinguished by the
presence or absence of ear pieces at each end or the number of
ear pieces.
A is only used for garden sheds with one section, for two sections
- two B beams are used, for 3 sections - one C beam is used, for 4
sections - two are used.
Window wall panel
The size of the Window wall panels and the large wall panel
should be consistent, and the installation position can be changed
according to actual needs
29
ENGLISH
A Side Girder
B Side Girder
C Side Girder