Publicité
_________________________________________________________________________________
Attaching the rear bag
11. Intended use
Removing and attaching the protective cover
Manual_FX-CTL900_Int24_rev4
Step 4:
Stretch the fabric roof over the wagon using
the telescopic rods.
Hook the rear bag into the horizontal frame struts
below the push handle as shown.
Step 1:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.
24
Publicité
