Publicité
_________________________________________________________________________________
Fixing the rear wheels
Assembly of the roofing
Manual_FX-CTL900_Int24_rev4
Step 1:
Pull the safety bolt as shown.
Step 2:
While holding the pulled out safety bolt, put the wheel
on the rear axle. When the wheel is in the desired
position, release the safety bolt.
Step 3:
Repeat the procedure for the 2nd rear wheel.
Step 1:
Remove the two pairs of roof bars from the transport
bag.
Step 2:
Join the bars of a pair along the middle retaining
rubber band.
Step 3:
Please place the attachments of the holding rods
diagonally on the telescopic rods - as shown in the
picture on the left.
"Top view" of the correctly positioned roof
bars.
23
Publicité
