DeWalt DWE627 Traduction De La Notice D'instructions Originale page 32

EngLIsH
Residual Risks

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot
during operation.
• Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN62841; therefore no earth wire is required.
The DWE625 LX (115V) is intended to be used with a safety
transformer manufactured to BSEN61558 and BS4343. Never
work without this transformer in place.
If the supply cord is damaged, it must be replaced only by
D WALT or an authorised service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead t o the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse for 230V U.K. plug: 13 A.
Fitting a Mains Plug to 115 V Units
(U.K. and Ireland Only)
• The plug fitted should comply with BS EN 60309 (BS4343),
32 Amps.

WARNING: Always ensure that the cable clamp is
correctly and securely fitted to the sheath of the cable.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
30
Package Contents
The package contains:
1 Router
1 Collet 12 mm (1/2" UK & ROI)
1 Parallel fence
2 Guide rods
1 Guide bush (30 mm)
1 22 mm wrench
1 SA Dust extraction tube
1 Remote Switch Box (DWE627 only)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. A)
The date code 56
is printed into the housing.
Example:
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Speed control wheel
1
Main handles
2
On/off trigger switch
3
Thumb wheel
4
Height stop rod
5
Plunge lock lever
6
Quick release button
7
; the
2
Spindle lock button
8
Collet assembly
9
Base plate
10
Multiple position turret stop
11
, which also includes the year of manufacture,
2021 XX XX
Year and Week of Manufacture