Publicité
5
Fig. 5
6
Fig. 6
WARNING: Make sure that the dust bin and filters are properly installed in
place before plugging the vacuum cleaner.
5.2.
PLUGGING, UNPLUGGING, TURNING ON/OFF
7
Fig. 7
Accessories holder
■
The accessories holder (3) can be clipped onto the
telescopic tube (19) to keep cleaning tools handy during
cleaning (Fig. 5).
Adjusting the telescopic tube
The telescopic tube (19) has an inner and outer tube.
■
Slide the Telescopic tube release button (20) in the
direction of the arrow marked on the button and hold
it while you adjust the telescopic tube to the desired
length (Fig. 6).
■
Release the button to lock the tubes into place. Do not
over extend the telescopic tube.
Plugging
Pull the power cord to the desired length (Fig. 7). Stop
■
pulling the cord when you see the yellow mark.
■
Then insert the plug firmly into a power outlet of
matching voltage.
CAUTION: Do not pull the power cord further than
the red mark to avoid damage.
9
EN
Publicité
