Publicité
8
EN
Fig. 8
9
Fig. 9
5.3. GENERAL OPERATION
10
Fig. 10
11
Fig. 11
Turning on
■
Press the Power button (13) to turn the vacuum cleaner
on (Fig. 8).
Turning off, unplugging and rewinding the cord
Once finished using the appliance:
1.
Press the Power button (13) to turn the vacuum cleaner
off (Fig. 8).
2.
Remove the plug from the power outlet.
3.
Hold the plug and press the Cord rewind button (14)
with the other hand to rewind the cord automatically
(Fig. 9). Guide the cord with your hand to prevent the
plug and cord to whip when rewinding.
4.
To transport the vacuum cleaner, lift the carry handle
(14).
Suction power control knob
■
Turn the Suction power control knob (13) to adjust the
suction power according to the type of surface to be
cleaned (Fig. 10).
– Minimum: For delicate materials, curtains.
– Medium: For furniture, rugs and mattresses.
– Maximum: For tiles, wooden or other hard floors.
Suction power regulator
■
When it is difficult to move the floor brush (18) over the
floor or carpet, you can also adjust the suction power
with the Suction power regulator (8) on the handle of
the suction hose (Fig. 11). Slide the switch up/down to
adjust.
10
Publicité
