Publicité
Only operate the torque wrench manually. Never expose the torque wrench to shocks or
•
knocks.
As soon as you hear the "click" sound, release the torque wrench and do not apply any further
•
pressure. The "click" sound becomes louder at higher torque settings and quieter at lower
torque settings.
Make sure that the attachment used matches the screw connection.
•
Maintain the maximum allowable load on the attachment and bear in mind that it may be
•
lower than the maximum release torque of the torque wrench. Overloading the attachment
may cause damage or breakage of the attachment or screw connection.
CAUTION! If you use foreign bits, you must observe the maximum torque of the respective
•
tool and the torque wrench may be adjusted to the maximum torque of the selected bit.
INTENDED USE
The torque wrench is used for controlled tightening of screw connections with a right-hand thread.
Use the product only for the purpose it is intended for. The manufacturer accepts no liability for
damage caused by improper use. Any modification to the product may negatively impact safety,
cause hazards and invalidate the warranty.
Only suitable for domestic use; not for commercial use.
UNPACKING INSTRUCTIONS
Open the box and remove the product. After unpacking, please check the product for damage
and to ensure it is complete. Subsequent complaints cannot be accepted.
CONTENTS INCLUDE:
Torque wrench
•
4" 10 cm extension with hexagon socket
•
¼" attachments:
•
-
Hex bits H2, H2.5, H3, H4, H5, H6, H8, H10
-
Torx T10, T25, T27, T30
-
Cross-head (Pozidriv) PZ1, PZ2, PZ3
Storage case
•
MAXIMUM TORQUE
Bit
Max. torque (Nm)
H2
2.1
H2.5
4.7
H3
7.7
H4
17.8
H5
35
H6
57
H8
126
H10
252
T10
4,8
T25
19.8
T27
28
T30
38.9
PZ1
3.9
PZ2
10.5
PZ3
32.6
8
www.DEUBAXXL.de
Publicité
