Publicité
INSTRUCTIONS
Dear Customer,
Thank you for choosing our product. You have made the right choice by purchasing one of our
branded products. Our products are regularly inspected to ensure that they meet the desired high
quality standards and, of course, always comply with the stringent requirements of the European
Union.
READ THE USER GUIDE. IMPORTANT INFORMATION. KEEP IN A SAFE PLACE FOR
FUTURE USE!
Read all the instructions carefully before using the product for the first time. Keep this manual for
future reference. If you pass on the product one day, be sure to hand over this guide as well.
WARNING! POTENTIAL DANGER!
Observe the safety information and set-up instructions to avoid the risk of injury or damage to the
product.
DANGER OF SUFFOCATION!
Keep small parts and packaging material out of the reach of children!
WARNING!
The appliance is not a toy and should not be handled by children.
PRODUCT MODIFICATION
Never make modifications to the product! Modifications will invalidate the warranty and the
product may become unsafe or, in the worst case scenario, dangerous.
GENERAL NOTES
Check the attachments for damage or wear before each use. The use of damaged or worn
•
attachments may affect the release accuracy of the torque wrench, damage the screw
connection, or damage or break the torque wrench, screw connection or attachment.
Never use the torque wrench to tighten left-hand threaded screw connections, to loosen screw
•
connections, or as an impact or lever tool.
The torque wrench is a test tool and may only be used by qualified persons for tightening
•
right-hand threaded screw connections. The torque wrench must not be used by children or
by persons who are not familiar with the torque wrench.
Use the torque wrench only within the specified torque range.
•
Check that the attachment is correctly and securely positioned before each use of the torque
•
wrench. Do not continue to use the torque wrench and/or attachment if the attachment is not
securely seated on the connecting square.
Before tightening, check that the screw connection is in good condition. The thread must be
•
free of damage and dirt and, if necessary, should be lightly lubricated. Screws or bolts must
not be damaged or worn. Never try to tighten a damaged screw connection.
Place the attachment precisely on the screw connection to prevent it from slipping.
•
Avoid jerky movements and do not exert excessive pressure on the torque wrench to tighten
•
a screw connection.
EN
7
www.DEUBAXXL.de
Publicité
