Publicité
CTP 1840
TECHNICAL SPECIFICATION
Rated Voltage: 220-240V~ 50Hz
Charging Time: 6 hours
Battery Capacity: 600 mAh ×2 (included)
CHARGE
Charge your hair clipper for 6 hours before use it. Ensure the appliance is off during the battery is charging.
You can charge hair clipper plugging directly to charge adaptor or on the base. To charge it on base
connect adaptor to the base following this instructions:
- Turn over the base. Turn the tab as shown in the picture.
- Place the connector of adaptor in the hole under the tab:
- Close the tab until it clicks to avoid the connector moves:
14
Publicité
