Publicité
Backlight
• Press [Menu].
• Rotate and press [Volume/Up/OK/Down] to select "Main Menu".
• Rotate and press [Volume/Up/OK/Down] to select "System Settings" on the submenu.
• Rotate and press [Volume/Up/OK/Down] to select "Backlight".
• Rotate and press [Volume/Up/OK/Down] to set "Time out" (time that the display will lower brightness).
• Rotate and press [Volume/Up/OK/Down] to set "On level" (brightness of the Display when it is on).
• Rotate and press [Volume/Up/OK/Down] to set "Dim level" [brightness of the Display when it is in Standby.
Select an language
• Press [Menu].
• Rotate and press [Volume/Up/OK/Down] to select "Main Menu".
• Rotate and press [Volume/Up/OK/Down] to select "System Settings on the submenu.
• Rotate and press [Volume/Up/OK/Down] on the remote control to choose "Language".
• Rotate and press [Volume/Up/OK/Down] to select the desired language.
Factory reset
Note: Initiating a factory reset removes all presets, stored stations, alarms and resets all other options to default settings.
• Press [Menu].
• Rotate and press [Volume/Up/OK/Down] to select "Main Menu".
• Rotate and press [Volume/Up/OK/Down] to select "System Settings" on the submenu.
• Rotate and press [Volume/Up/OK/Down] to select "Factory reset".
• Rotate and press [Volume/UP/OK/Down] to select "Yes". The device will be reset to factory settings. Select "No" if you do
not want to reset to factory settings.
Software version
• Press [menu].
• Rotate and press [Volume/Up/OK/Down] to select "Main Menu".
• Rotate and press [Volume/Up/OK/Down] to select "System Settings" on the submenu.
• Rotate and press [Volume/Up/OK/Down] on the remote control to select "Software Version".
• Press [Volume/Up/OK/Down] to show the current Software version.
8
Publicité
