Publicité
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product
must be returned, it is important that the product is returned in the original factory box and packaging. If the device has
been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the
mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The
unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Display
2. Power/Menu
Press to put the power on/off
Press to enter menu
Press to toggle within the menu
3. Info
Press to show information of the channel
4. Scan
Press to search for stations
Press and hold for Scan in FM mode
Press to scan for stations in DAB mode
Press for play/pause in BT/USB mode
5. Preset
Press and hold to preset station
Press to show list of favourite stations
Press for Repeat one/Random loop in USB mode
6. Volume/Up/OK/Down
Rotate to increase/decrease volume
Press to confirm
Rotate to scroll in settings + submenu's
Press and hold to disconnect in BT mode
Press the 'Volume/Up/OK/Down' button on the product. Rotate
the volume button in BT and USB modes to select the previous or
next track
7. Antenna
8. Aux in
3.5mm jack input for auxiliary play
9. USB port
10. DC in
12V power socket for connecting the supplied power adapter
• Remove the radio from the package box.
• Plug in the power adapter. Press the [Power/Menu] button on the front side.
Caution: Use only the adapter supplied with the radio. Connecting a power supply with a different rating can cause
permanent damage to the radio and may be hazardous.
If there is Digital Audio Broadcasting (DAB) in your area, the unit can pick up the DAB stations.
Place the radio close to the window and extend the antenna as far as it can go to get the best reception. Sometimes you
may need to adjust the direction of the antenna to improve reception.
Press [Menu] to enter the menu. Rotate the button [Volume/Up/OK/Down] to select DAB. Press [Volume/Up/OK/Down] to
confirm.
5
Publicité
