Publicité
3. Instructions for use
3.1 Mounting
NOTE
◊
Remove all parts from the package. Check that all parts are present.
◊
Place a cardboard sheet or rug on the surface before assembling the product to avoid
scratching or damaging the surface.
1
4
1.
Set the frame upright. Place the handlebar on the wheel fork at the desired height and secure
it with the Allen key.
2. Place the saddle on the frame at the desired height and tighten the fixing clamp.
3. Remove the wheel axle plate from the wheel.
4. Insert the gear pin into the wheel axle, then attach the wheel axle plate to the wheel. Make
sure the sprocket pin is pushed through the wheel axle plate.
5. On both sides of the wheel, place a spacer on the sprocket pin. Place the wheel between the
wheel fork. Secure the wheel with the screw. Repeat steps 3 through 5 for the other wheel.
6. Tighten the screws of the wheels with the Allen wrenches.
7.
The product is ready for use.
ATTENTION!
◊
Make sure the handlebars and saddle are properly mounted in the frame and secure.
3.2 Using
1.
Have the child sit on the saddle.
2. Make sure the child has both hands on the handlebars. The handlebars should always be held
while using the product.
3. The product starts moving when the child starts walking while sitting on the saddle.
2
5
3
6
English
17
Publicité
