FRIGOGLASS ICOOL2-40 Mode D'emploi page 20

ENG
•
Store your back-up stock in a cool and/or dark place so that when reloaded, the ICM will need
much less time to cool them down.
•
Wipe moisture off the products you place in the ICM.
•
Avoid opening the door for long periods of time.
3.4. Electronic controller Instructions
For instructions of the functionality of your Carel Controller (option) and its related optional features,
please visit the following website link: http://www.frigoglass.com/manuals/.
4. Care & cleaning
It is important to clean the merchandiser twice a year. In order to avoid mould formation, odours, etc.
product compartments must also be thoroughly cleaned. The interior of the ICM should be cleaned
with a mildly soapy cloth and the glass surface using a window-cleaning agent.
5. Troubleshooting
20
Prior to any cleaning (inside or outside the device) procedure, unplug
the ICM! Remove the plug and make sure that the operator can check
from any of the points which he has access to, that the cable is
unplugged.
Never use a water hose or high pressure jet to clean the cooler.
•
In case the merchandiser is placed in very dusty and/or greasy
environment, the regular cleaning of the condenser by an
authorized technician is mandatory.
•
Keep the cooler in a stable position during cleaning, do not step on
or lean over the cooler.
•
Do not clean with sharp objects, flammable or corrosive liquids or
sprays.
ALL ACCESS TO THE COOLING SYSTEM AND ELECTRICAL PARTS
(CHANGING LIGHTING OR REFRIGERATION DECK) MUST BE
PERFORMED BY AUTHORIZED SERVICE PERSONNEL ONLY.
ICOOL2-40 [R600a] C and ICOOL2-40 Platinum [R600a] C are
equipped with HC refrigerant. All service operations on
cooling mechanism & gas charging should be performed in a
well ventilated environment or in open air. Do not smoke
during maintenance.