Publicité
Media Player
1
5
6
7
The amplifiers feature a built-in media player that supports Wi-Fi Sream, MP3, FM radio, and Bluetooth. You can
switch between these modes by pressing the Mode button, as indicated on the LED display. Additionally, an IR
remote control is included, allowing you to operate the media player remotely from distances of 10 to 30 meters.
Bluetooth
The Bluetooth feature enables you to connect a smartphone or tablet to the media player for playing back stored
files or streaming digital audio. To use this feature, you will need to pair the sending device with the receiver as
described.
(BT name:BT66078, Password:1234)
1.
Open the Bluetooth settings menu on your smartphone, tablet, or other device that will send the audio.
2.
Scan for Bluetooth devices and look for the amplifier in the list of available devices. Make sure the amplifier
is turned on and within a 30-50 meter reception range.
3.
Select the Bluetooth amplifier, and your device should confirm that it is connected as an audio device.
4.
Play audio from your device, ensuring that the volume controls are not turned down or muted.
5.
Adjust the MEDIA volume on the amplifier to the desired level.
6.
If the Bluetooth connection is lost, you may need to reconnect by selecting the Bluetooth amplifier again on
your sending device.
7.
Use the Previous, Next, and Play/Pause buttons on the amplifier as remote playback controls. Holding the
Previous or Next track buttons will adjust the output volume.
USB/SD Playback
Insert a USB flash drive into the USB port and/or an SD card into the SD card slot. Press the CD/USB/SD button
to select the appropriate memory device for playback. To start playing the current track, press the
PLAY/PAUSE button; press it again to pause as needed. The method for searching and playing tracks is the
same as previously described for the CD player.
FM Tuner
Press the FM select button to activate the FM tuner function. Then, use the Previous or Next buttons to choose
a saved channel.
Tuning and storing stations
To manually adjust the frequency, use the Forward/Reverse seek buttons to tune in increments of 0.05MHz. For
automatic station searching, press and hold the Forward/Reverse seek buttons. The auto search will stop when it
finds a station, and you will have the option to save this station.
When a station is found, press the PLAY/PAUSE button. A "00" channel number will appear on the display. Use
the Previous/Next buttons to choose the channel memory where you want to save the station. Press
PLAY/PAUSE again to confirm and save the station to the selected channel memory. You can stop the auto
search at any time by pressing the Forward/Reverse seek buttons.
Control Interface
2
3
4
8
9
10
1
TF card input
3
IR sensor
5
Mode to select MP3/BL/FM
7
Folder
9
Previous & volume (-) decrease
2
Display Screen
4
USB input
6
Play
8
RPT repeat
10
Next & volume (+) increase
5
Publicité
