Publicité
Ventilation Requirements
Important: Position the TX series amplifier in a way
that ensures good airflow. Make sure its vents on
the top and sides are not blocked, as proper
ventilation is crucial for its operation. Avoid
placing it in areas with excessive dust or allowing
dust to accumulate and clog the vents. Do not
place the TX series amplifier directly above or
below any device that generates heat, such as an
audio amplifier.
Ensure there is a minimum of 2 inches of open
space around the sides of the unit, with free airflow
above it. Maintain a clearance of approximately 1.5
inches above and below the unit, especially if it's
mounted in a rack.
Electrical Power
The TX series amplifier operates on 24VDC, and its
adapter is compatible with 110VAC, 50/60 Hz. For
the best performance, connect it and any related
equipment to a dedicated 20-amp circuit. To
reduce interference from electrical noise, consider
using a power line conditioner.
Important Considerations
Always disconnect the power cord before
making any connections.
Ensure all connections are correct and the
wiring polarity is accurate.
Keep power cords away from signal cables to
avoid interference.
Use high-quality signal cables and patch cords.
Label all wires clearly at both ends, indicating
their room location.
Avoid placing speaker or signal cables near
electrical wires. If they must run parallel, keep
them at least two feet apart. Cross electrical
lines at a 90° angle.
Do not connect the main power cord until all
other connections are verified. Connecting or
disconnecting wiring while the system is on can
cause damage or erratic performance. Touching
live wiring can lead to electrical shock.
Regularly
check
installation
to
prevent
connections are a common reason for damage
not covered by warranty.
Setup and Summary
all
connections
during
damage.
Incorrect
Description
The TX series Mixer Amplifier, equipped with Wi-Fi
streaming, MP3 playback, FM tuner, and Bluetooth
connectivity,
is
the
perfect
commercial environments such as schools, supermarkets,
convenience
stores,
banks,
compact unit consolidates built-in audio sources, pre-
amplification, audio amplification, and expandability
options for external sources and microphones into a
single desktop chassis.
The TX series amplifier allows integration of up to three
microphones and four external audio sources along with
its built-in Wi-Fi streamer, FM tuner, Bluetooth receiver,
and USB and SD card MP3 players. The front panel
includes convenient controls for adjusting the volume
levels of all sources and an integrated LCD display that
indicates
the
selected
Background Music (BGM) and Music On Hold (MOH)
functions
and
includes
Phantom Power is available for the primary microphone,
and ducking levels are adjustable.
Features
Compact design with built-in 70V/100V transformer
technology.
Desktop amplifier featuring Wi-Fi streaming, MP3
player, FM radio, and Bluetooth.
Available in 60W (TX60) and 120W (TX120) power
output models.
Speaker outputs available for 70V, 100V, 4 Ohms, 8
Ohms, and 16 Ohms.
Front panel USB/SD inputs for the MP3 player, along
with IR remote control for the MP3 player, FM radio,
and Bluetooth.
LED indicators for power, clipping, protection, and
signal presence.
Mic 1 features a balanced XLR input with configurable
phantom
power.
Mic
unbalanced,
removable
connectors, accommodating both microphone and
line inputs.
Built-in telephone input with VOX priority and MOH
output.
Front-panel
controls
adjustments of all physical inputs, MP3/FM, master
volume, bass, and treble.
Line out for connection to an external amplifier for
additional power.
Protection features against short-circuit, clipping,
overload, and overheating.
all-in-one
solution
and
retail
stores.
audio
source.
It
supports
a
Telephone
Paging
2
and
3
use
switchable,
screw-down
Phoenix
for
individual
volume
for
This
Input.
3
Publicité
