Secret Lab HEAVY DUTY MAGNUS Instructions D'assemblage page 8

ASSEMBLY GUIDE & USER MANUAL
Once the hooks are engaged, you should be able to
B
pivot your monitor backwards such that the locks
are aligned. Once the VESA plate and mount are
flushed, twist the lock knob (1) to the locked
position and press down onto each lock screw (2)
and fasten it by hand. Fully tighten (3) the lock
screws clockwise with the tools provided to fully
secure your monitor.
Once your monitor screen is secured
in place, do not dismount it without
following the dismounting
instructions provided.
Back View
Tighten the Tension Adjustment Screw located at the top of the Upper
03
Arm by rotating it clockwise.
You can check the tension level via the indicator located above the screw.
Once the tension is tight enough for your monitor's weight, you should be
able to lift your monitor up without it sinking down. Remove the
packaging box, once your monitor is elevated fully without support.
7
1
Top View
2 2
ALLEN KEY
ALLEN KEY
Back View
3 3
Ensure that you do not
overtighten the Weight
Adjustment Screw beyond
the maximum mark.