Secret Lab HEAVY DUTY MAGNUS Instructions D'assemblage page 4

MONITOR DISMOUNTING
DO NOT DISMOUNT YOUR MONITOR SCREEN WITHOUT ADHERING TO THE FOLLOWING DISASSEMBLY STEPS.
01
Disconnect all cables from your monitor
screen and remove both handles from the
VESA Mount.
02
Locate the Tension Adjustment Screw at
the top of the Upper Arm. Turn it
counterclockwise slowly.
03
As you turn the Tension Adjustment
Screw, you'll notice your monitor screen
starting to sink. Continue turning it until
the indicator reaches near the minimum
tension level, and your monitor screen is
fully supported on your desktop.
Note: If your monitor is unable to reach
your desktop, choose a stable support
base to make up for the height.
3
04
05
06
ALLEN KEY
Next, locate the two lock screws (1) and loosen
them. While doing this, make sure to support
your monitor screen.
Once the lock screws are loosened, press the
monitor against the VESA mount, and while
maintaining pressure, locate and twist
the lock knob (2) 180° to unlock.
With the lock knob unlocked, you should
now be able to unhook the monitor arm
from the VESA plate by gently pivoting
your monitor away from the VESA mount.
Slowly release the upper arm until you
no longer feel any resistance pushing
back against you.
Back View
1 2 1