HOMEKRAFT HKMIXPLAROTARY Guide D'utilisation page 25

5. Move the lever for lifting/lowering mixer's arm (2) UP, simultaneously
lowering the mixer's arm (3).
6. Connect the stand mixer to the power supply.
7. Turn the device ON by turning the speed knob (1) to the desired position.
WORKING WITH MIXING TIP
The stand mixer with attached mixing tip is intended for preparing cakes, biscuits, pasta,
icings, fillings, muffins and mashed potatoes.
1. Move the lever for lifting/lowering mixer's arm (2) UP and then lift mixer's
arm (3).
2. Install the bowl cover (5) on the socket for mixing tips (4), in order to prevent
splashing.
3. Insert the mixing tip (9), until it stops and then turn it counter-clockwise.
4. Place the bowl (5) in the base of the mixer, and then turn it clockwise until the
latches lock in place.
5. Move the lever for lifting/lowering mixer's arm (2) UP, simultaneously
lowering the mixer's arm (3).
6. Connect the stand mixer to the power supply.
7. Turn the device ON by turning the speed knob (1) to the desired position.
During use of the mixer, you can add any ingredients, inserting them through the special
opening in the bowl cover (5).
NOTE! If you lift the arm of the stand mixer during operation, the device will stop
immediately. To restart the mixer, turn the speed knob to OFF position, tilt the mixer head,
wait a few seconds, and then again select the speed. The mixer should start immediately.
BLENDER OPERATION (FIGURE C.)
The stand mixer with blender is designed for preparation of cocktails, smoothies, juices.
To start working with the blender cup, meat mincer socket (7) should be closed each time
with a special cover. Otherwise, the device will not work!
1. The blender base (17) features the following symbols:
EN