Samsung HT-FS9200 Manuel D'utilisation page 15

3. Insert speaker cable into the hole on the bottom of
the stand base.
4. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to
the coloured sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the
speaker plugs to the colours of the speaker jacks.
Black Red
| CAUTION |
\
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the
rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by
the company.
\
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
\
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
\
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
\
Do not hang the subwoofer on the wall using the duct (hole).
| NOTES |
\
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
3
SPEAKERS OUT
SUBWOOFER
IMPEDANCE : 3
Subwoofer
T
SPEAKERS OUT
L
SUBWOOFER
N IMPEDANCE : 3
FRONT
L
FRONT
R
FRONT L
Front Speaker (R)
FRONT
R
4
Front Speaker (L)
15
|
English