Publicité
QUERY MODE
Codes
Indoor Display Indication
80
Swing memory
81
Cooling and heating mode
82
The lowest setting temperature
The highest setting temperature
83
84
Dry contact delay times
85
Dust filter clean reminder
86
M odbus address
87
Cooling temperature compensation
88
Heating temperature compensation
DRY CONTACT INSTRUCTION
1. Defination
There is a cable marked DRY CONTACT and with a female blue connector in the end, and there
is male cap protect the connector. The cable already connected to the PCB connectors CN29
(GND, DRY, +12V)
There are 3 wires.
BROWN is voltage +12VDC
ORANGE is ON/OFF input
GREEN is ground (GND)
2. TWO Modes for using the Dry contact.
2.1 Mode 1: Use only contact as dry contact.
ON or OF
"CC" : Cooling Only ,"CH" : Cooling
and Heating" , "HH" : Heating only
16~25ºC
26~31ºC
0~6min
ON or OF
00-FF
-2~2℃
-6~6℃
7
Rules
V.1
Publicité
