Publicité
BEFORE CALLING FOR SERVICE
Problem
Steam doesn't
• Water level error.
generate but no error
code is shown.
Garments still
• Too many or too different
wrinkled after
STEAMFRESH
.
™
There are no creases
• The function of this cycle
left on garment after
STEAMFRESH
.
™
Garments have
• This is normal.
static after REDUCE
STATIC.
Garments are too
• Correct drying options not
damp or too dry after
REDUCE STATIC.
Garments are not
• This is normal.
uniformly damp after
EASY IRON.
Water drips from door
• This is normal.
during Steam Cycle.
Steam is not visible
• This is normal.
during Steam Cycle.
Drum does not turn
• This is normal.
during Steam Cycle.
Cannot see steam
• This is normal.
vapor at the
beginning of cycle.
The display shows
• MORE TIME button pressed.
BULKY LOAD.
Odors remain in
• STEAMFRESH
clothing after
STEAMFRESH
.
™
CHECK FILTER light
• Lint filter is almost clogged
is on during the
drying cycle
• Ductwork is slightly too
2 bars are displayed
In the LCD screen.
• Partial blockage of the
END OF CYCLE
FIN DEL CICLO
4 bars are displayed
• Ductwork is too long or has
In the LCD screen.
• Significant blockage of the
NEED FLOW CHECK
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS
TO BE REMOVED
FIN DE CYCLE
IMMEDIATELY.
(cont.)
Possible Causes
types of garments in dryer.
is to remove wrinkles from
fabric.
selected.
did not
™
remove odor completely.
or full.
long or has too many
turns/restrictions.
ductwork due to lint buildup.
too many turns/restrictions.
ductwork due to lint buildup
or debris.
Solutions
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is difficult to see when the door is
closed.
• The drum is turned off so that the steam vapor
remains in the drum.
• Steam is released at different stages of the cycle
for each option.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
• Fabrics containing strong odors should be
washed in a normal cycle.
• Pause the drying cycle and clean the lint filter.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If "END OF CYCLE" is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• D uctwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• I f "NEED FLOW CHECK" is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
41
Publicité
