Publicité
Care & maintenance
Here's how to clean
the nutribullet
:
®
Please follow the below
cleaning instructions before
the first use, and after each use.
The most important
STEP 1:
ALWAYS POWER OFF
thing —
THE UNIT
UNPLUG
and
the mo-
tor base from the power outlet
when it is not in use. Do not
attempt to handle the applian-
ce until all parts have stopped
moving! This includes during
assembly and disassembly,
while changing accessories du-
ring cleaning, and any time you
leave the machine unattended.
Detach the pitcher
STEP 2:
from the motor base.
Clean the individual
STEP 3:
components (motor base,
pitcher) as recommended
in the following pages.
MOTOR BASE:
• To avoid risk of injury,
NEVER
attempt to clean the actuator
system on the motor base
while the nutribullet
Blender
®
is plugged in.
22
• Do not attempt to remove any
pieces from the motor base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
• To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it's clean.
WARNING:
Never submerge
the motor base in water.
nutribullet
PITCHER:
®
WARNING:
Blades are sharp!
Use caution when cleaning
the pitcher.
• The pitcher is dishwasher-
safe. We recommend rinsing
and briefly scrubbing it with
a dish brush to remove any
remaining debris before
placing in the dishwasher.
NEVER
use the sanitize cycle
to wash the pitcher — heat
this high can warp the plastic.
• If preferred, hand-wash the
pitcher with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
• Regularly check the
structure of the pitcher and
twisting threads for cracking,
crazing, or breakage.
If damaged, replace
immediately to prevent
possible personal injury.
• NEVER USE A PITCHER THAT
DOES NOT PROPERLY ALIGN
WITH THE BLADE.
Doing so
may cause the pitcher and
motor base to separate,
exposing the
blade assembly and
potentially causing severe
personal injury.
TAMPER
• Always hand-wash the
tamper with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
Replacement parts
To order additional parts and accessories, please visit our website
at
nutribullet.com
or feel free to contact customer service.
STUBBORN CLEAN UP:
If ingredients dry inside the
nutribullet
Blender, fill your
®
vessel with water to the liquid
MAX line and add 1-2 drops of
dish soap. Attach the pitcher lid
with the vented lid cap inserted,
and place the pitcher on the
motor base. Blend on
LOW
for 20-30 seconds; this should
loosen any remaining debris.
How to store:
Store the nutribullet
pitcher
®
upright with the pitcher lid
secured on top. Do not place
anything on top of the pitcher
lid. Store remaining pieces in a
safe place where they will not
be damaged and won't
cause harm.
23
Publicité
