Publicité
STEP 5: Attach your TUSHY Ace Base Plate to
the bowl
a. Insert the included Top-Mounting Rubber Inserts into the toilet bolt
holes until they are nearly flush with the toilet rim. Keep the bolts in
the rubber inserts to make it easier to get the inserts in the toilet bolt
holes. Once the rubber inserts are in place, unscrew the Mounting
Bolts and set them aside until the end of step 5.
TUSHY TIP
If you're having trouble getting the rubber inserts into the toilet bolt
holes, use some soapy water to help them slide in easier!
b. Place the included Base Plate over the toilet bolt holes, making
sure it is centered and straight. Please also make sure the side of the
Base Plate with rubber non-slip pads is facing down, not up. Align
the back of the Base Plate with the tank, leaving a gap of at least
3/4" or the thickness of your thumb. It is okay if your gap is bigger
than that.
3/4"
20
c. Line up the included mounting brackets on the Base Plate directly
over the toilet bolt holes. The mounting brackets should click into the
grooves in the Base Plate to stay in place.
Mounting
Bracket
d. Slide the Bolt Washers onto the bolts. Insert the Mounting Bolts
through the top of the mounting brackets. Tighten them using a
Phillips head screwdriver by turning clockwise until the Base Plate is
tight enough to stay in place. Be careful not to overtighten.
Mounting Bolt
Bolt Washer
TUSHY TIP
While you're tightening the screws, check intermittently to see if the
mounting bracket feels snug. If it still wiggles, keep tightening. If it feels
snug, you're all set!
Mounting
Bracket
21
Publicité
