Publicité
Connecting Your TUSHY Ace
18
STEP 4: Connect to the water line
a. Disconnect the existing flexible
hose from your toilet tank by turning it
Toilet tank
clockwise if you're looking at the con-
nection from above. Be prepared to
Inlet
catch or wipe up some residual water
that might spill onto the floor.
b. Screw the existing flexible hose to
the bottom of the Tank Adapter and
Inlet
then screw the top of the Tank Adapt-
er counter-clockwise onto the tank if
you're looking from above. Make sure
the black rubber gasket is inside the
top of the adapter before screwing.
Be careful not to overtighten!
c. Screw the provided Flexible
TUSHY Ace Hose to the Tank
Adapter's side connection.
Be careful not to overtighten!
WARNING: Connect to cold water line only (not the hot water line).
TUSHY TIPS
If you don't have access to the tank connection, check out our
installation video at hellotushy.com/aceskirted and email us at
aceinstall@hellotushy.com for that part.
Got a hard metal pipe instead of a flexible hose connected to your toilet?
No problem! You can swap that hard metal pipe out and replace it
with the Flexible TUSHY Ace Hose included in your TUSHY Ace spare
parts kit!
19
Publicité
